Joint Beamforming and Phase Shift Design for Hybrid-IRS-and-UAV-aided Directional Modulation Network

by   Rongen Dong, et al.
Edith Cowan University
University of Kent
NetEase, Inc

Recently, intelligent reflecting surface (IRS) and unmanned aerial vehicle (UAV) have been introduced into wireless communication systems to enhance the performance of air-ground transmission. To make a good balance between performance, cost, and power consumption, a hybrid-IRS-and-UAV-assisted directional modulation (DM) network is investigated in this paper, where the hybrid IRS consists of passive and active reflecting elements. To maximize the achievable rate, three optimization algorithms, called maximum signal-to-noise ratio (SNR)-fractional programming (FP) (Max-SNR-FP), maximum SNR-equal amplitude reflecting (EAR) (Max-SNR-EAR), and maximum SNR-majorization-minimization (MM) (Max-SNR-MM), are proposed to jointly design the beamforming vector and phase shift matrix (PSM) of hybrid IRS by alternately optimizing one and giving another. The Max-SNR-FP method employs the successive convex approximation and FP methods to derive the beamforming vector and hybrid IRS PSM. The Max-SNR-EAR method adopts the maximum signal-to-leakage-noise ratio method and the criteria of phase alignment and EAR to design them. In addition, the Max-SNR-MM method utilizes the MM criterion to derive the IRS PSM. Simulation results show that the rates harvested by the proposed three methods are slightly lower than those of active IRS with higher power consumption, which are 35 percent higher than those of no IRS and random phase IRS, while passive IRS achieves only about 17 percent rate gain over the latter. Moreover, compared to Max-SNR-FP, the proposed Max-SNR-EAR and Max-SNR-MM methods make an obvious complexity degradation at the price of a slight performance loss.


page 1

page 3

page 8


Joint Beamforming and Phase Shift Design for Hybrid-IRS-aided Directional Modulation Network

To make a good balance between performance, cost, and power consumption,...

Joint Power Allocation and Beamforming for Active IRS-aided Directional Modulation Network

To boost the secrecy rate (SR) of the conventional directional modulatio...

Two Low-complexity Efficient Beamformers for IRS-aided Directional Modulation Networks

As an excellent tool for aiding communication, intelligent reflecting su...

Low-complexity Joint Phase Adjustment and Receive Beamforming for Directional Modulation Networks via IRS

Intelligent reflecting surface (IRS) is a revolutionary and low-cost tec...

Optimal Placement of Active and Passive Elements in Hybrid RIS-assisted Communication Systems

Hybrid reconfigurable intelligent surfaces (HRIS) are RIS architectures ...

Configuring Intelligent Reflecting Surface with Performance Guarantees: Blind Beamforming

This work gives a blind beamforming strategy for intelligent reflecting ...

Performance Analysis of Wireless Network Aided by Discrete-Phase-Shifter IRS

Discrete phase shifters of intelligent reflecting surface (IRS) generate...

Please sign up or login with your details

Forgot password? Click here to reset